Seats and Restraints 3-9
2. Pull the seatback release lever
to unlock the seatback.
A tab near the lever raises when
the seatback is unlocked.
3. Fold the seatback forward.
Raising the Seatback
Notice: Damage to the safety belt
or rear seat locking mechanism
can occur if the safety belt is
caught between the rear seatback
and the seat locking mechanism.
The safety belt must be out of the
way when the rear seat is raised
to the upright, locked position.
If the safety belt is damaged, see
your dealer and have it replaced.
To raise the seatback:
A. Seatback Locking Mechanism
B. Safety Belt Storage Clip
1. Make sure the safety belt is
in the storage clip (B) before
raising the seatback.
The safety belt should not
cross the seatback locking
mechanism (A) when raising
the seatback.
2. Raise the seatback and push it
rearward to lock it into place.
A tab near the seatback release
lever retracts when the seatback
is locked.
3. Push and pull the top of the
seatback to be sure it is locked
into position.
4. Return the safety belt to the
safety belt guide after raising the
seatback.
Keep the seat in the upright, locked
position when not in use.
To Next Page
Loading...
