ChipBLASTER STANDARD UNIT D30-80-1 - 18.5. Deflection and force chart

ChipBLASTER Inc
40
18.0. BELT INSTALLATION (Cont.):
Figure 16
Maximum Force= 4000 x DHP
RPM x Pitch Diameter
Minimum Force = 5000 x BHP
RPM x Pitch Diameter
DHP = Belt Horsepower or Motor Horsepower x Recommended Service Factor
BHP = Brake Horsepower Or Motor Horsepower
RPM = Speed of Fastest Shaft
Pitch Diameter = Diameter of Smallest Sprocket
REFER TO CHART FOR DEFLECTION AND FORCE FOR THE MODEL IN USE.
REINSTALL ALL (GUARDS) PROTECTIVE PANELING ON THE
ChipBLASTER UNIT.
18.5. Deflection and force chart:
18.5