Model 108 FLEX-AUGER Installation Manual
System D utilizes right-hand 90 degree turns. The elevations should
be accomplished within the outside elbows. This system would be
recommended over system E since it eliminates additional elbows
and left hand turns.
System E uses one additional 90 degree elbow after entering the
building. Note that the elbows are left-hand turns. This system
would be improved if the feed bin was moved to the opposite side
of the building to provide right-hand turns instead.
System G represents an extended length system with one additional
90 degree elbow. This is acceptable, but Systems C or D would be
recommended (to reduce excessive run time). Optional equipment
required.
To Next Page
Loading...
Need help?
General