Model 108 FLEX-AUGERļ Installation Manual
NOT ALLOWED. System H is not recommended, due to 180 degree,
left-hand turns. Erratic auger operation would be expected. The
feed bin should be relocated or an Extension Hopper should be
utilized as in System G.
NOT ALLOWED. System I is not recommended, due to 180 degree,
left-hand turns. Excessive elbow wear and erratic auger operation
would be expected. Systems D, E, or G would be recommended.
NOT ALLOWED. This system uses 180 degree elbows and would be
subject to premature elbow wear due to outlet drop placement
before an elbow. System C would be recommended.
To Next Page
Loading...
