Freeze-dryer Beta 1-8 LSCbasic
Freeze-dryer Beta 2-8 LSCbasic
Version 03/2018, Rev. 1.5 of 09/03/2020 • sb-dc
Translation of the original operating manual
3.6.4 Hazards caused by improper connection
Risk of injury caused by consequences of improper connection
Improper connection may lead to a hazardous electrical incident at a later
time during the operation of the freeze-dryer.
This may lead to severe damage to health or even life-threatening injuries.
• Ensure that the local mains voltage matches the nominal voltage that
is stated on the name plate.
• Do not place any dangerous material, e.g. glass vessels containing
liquid substances, within the safety area of 30 cm around the freeze-
dryer. Spilled liquids may get into the freeze-dryer and damage the
electrical or mechanical components.
• Work on the power supply system must only be performed by certified
electricians.
• Have the electrical equipment of the unit inspected regularly.
• Defects such as loose or burnt cables must be eliminated immediately.
3.7 Safety notes concerning the operation
The following notes and instructions concerning the operation of the freeze-
dryer must be observed in order to protect all persons and property.
3.7.1 Hazards caused by electricity
Danger of life caused by electric shock
There is a risk of electric shock when touching current-carrying
components.
This may lead to ventricular fibrillation, cardiac arrest, or respiratory
paralysis.
• Only qualified electritians are authorised to perform work on the
electrical system of the freeze-dryer!
• The electrical equipment of the freeze-dryer must be checked at
regular intervals by a qualified electrician!
• Defects such as loose connections or burnt cables must be eliminated
immediately.
To Next Page
Loading...
