Christ Beta 1-8 LSCbasic - Notes on Transport

Freeze-dryer Beta 1-8 LSCbasic
Freeze-dryer Beta 2-8 LSCbasic
4 Storage and transport
34 / 107
Version 03/2018, Rev. 1.5 of 09/03/2020 • sb-dc
Translation of the original operating manual
→
4.3 Notes on transport
• Use suitable packaging for the transport, and if at all possible, the
original packaging.
• Install all transport safety devices (see chapter 4.5 - "Transport safety
devices").
• Over short distances, the freeze-dryer can be transported by a suitable
number of persons who reach under it from the sides.
• When lifting the freeze dryer, always reach under the freeze-dryer from
the side. Do not grab the unit at the plastic control panel (see figures
below).
correct
incorrect
Fig. 9: Lifting the freeze-dryer
CAUTION
The freeze-dryer Beta 1-8 LSCbasic weighs approx. 63 kg!
The freeze-dryer Beta 2-8 LSCbasic weighs approx. 78 kg!
CAUTION
The centre of gravity of the freeze-dryer is off-centre!
• When setting the unit down, ensure that the feet are upright (see figures
below).
correct
incorrect
Fig. 10: Unit feet