E Series User Manual
020-000515-01 Rev. 2 (03-2013)
Section 2: Introduction
2-8
STATUS LED
y
LED Status Projector State
Off Projector is in OFF state (without AC plug in)
Yellow (no blink) Projector is in standby mode (AC plug in)
Yellow long blink Projector is in startup state
Yellow long blink Projector is in cool down state
Flashing Green/
Yellow
Projector is in ash update state
Flashing Red Fan failure
Red (no blink) Over-temperature
Green (blink very
quickly)
Projector communications (Read/Write EEPROM)
Green (no blink) Projector is powered up and operating normally
PICTURE MUTE LED
y
LED Status Projector State
Green Picture mute is off – image is displayed
Yellow (no blink) Picture mute is on – image is black
To Next Page
Loading...
