Programmable AC Source 6430/6420/6415 User‘s Manual
Action 7-segment LED Display
1. Enter into shift mode by pressing SHIFT key, and the 40.5 60.0 0.00
“SHIFT” LED will be on.
2. Press I limit to turn on the “I LIMIT” LED. 40.5 30.0 0.00
3. Press 8 , ENTER . 40.5 8.0 0.00
4. Press
I limit to turn off the “I LIMIT” LED. 40.5 60.0 0.00
Note 1: In step 2
I limit occupies the same place as V/F does. Its function will be
augmented when shift mode is activated. Characters in blue print above the key
indicate the new function as “I LIMIT”.
Note 2: In step 3 the user can set the value of “I LIMIT” by pressing the keypad or turning .
Note 3: When I limit is activated, the output will be disabled.
3.3.2 Range
The full range of output voltage can be selected as 150V, 300V, or AUTO. For example, set the
range as 300V.
Action Indicator LED Display
1. Enter into shift mode by pressing SHIFT key, and the Green “SHIFT” LED is on.
“SHIFT” LED will be on.
2. Press RANGE several times until the “300V” LED is on. Green “300V” LED is on.
3. Press SHIFT to exit from the “SHIFT” mode. Green “SHIFT” LED is off.
*** NOTICE ***
The instrument has AUTO RANGE function under FIX. MODE. Other modes are without
AUTO RANGE function.
3.3.3 Output V and F
For example: set V as 135.5 volt and F as 82Hz.
3-6
To Next Page
Loading...
