Installation 2-3
3916 Service Delivery Switch Hardware Installation and Start-up Manual
009-3226-001 Standard Revision E
Copyright
©
2013-2015 Ciena
®
Corporation July 2015
WARNING
When installing the unit, ensure that the wiring meets the
national and local electrical codes.
WARNING
All AC power cords must meet the requirements of the local
and national electric codes prior to installation
WARNING
The 3916 AC relies on the AC power cord for the safety
ground. The outlet providing power to the 3916 must meet the
local and national Safety codes. The 3916 DC relies on the DC
Input connector GND connection for safety ground.
WARNING
All electrical interfaces on this product are intended for intra-
building connections only. These interfaces are designed as
type 2 or type 4 ports as described in GR-1089-CORE, Issue 6
and require isolation from the exposed outside plant cabling.
WARNING
For pluggable equipment, the socket outlet shall be installed
near the equipment and be easily accessible.
To Next Page
Loading...
