7-2 Regulatory Compliance
3916 Service Delivery Switch Hardware Installation and Start-up Manual
009-3226-001 Standard Revision E
Copyright
©
2013-2015 Ciena
®
Corporation July 2015
Canada
This Class B digital device complies with Canadian ICES-003.
Note: Shielded cables are required to meet Class B. Some of the
supported optics do not meet the Class B requirements. See Packet
Networking Transceivers Reference (009-2011-602) for more information
.
CE Compliance
The CE mark on the chassis of unit signifies that the system meets all relevant
European standards requirements based on the following directives:
• 2004/108/EC — EMC Directive
• 2006/95/EC — Low Voltage Directive
Note: Shielded cables are required to meet Class B. Some of the
supported optics do not meet the Class B requirements. See Packet
Networking Transceivers Reference (009-2011-602) for more information.
Immunity (EMC) CISPR 24 (2010)
EN 300 132-3 (2003-08)
EN 300 386 V1.4.1: 2008
EN 55024 (2010)
EN 61000-3-3 (2008)
EN 61000-4-11(ed.2) (2005)
Laser Safety CDRH Letter of Approval (US FDA approval)
FCC 21 CFR subpart (J) (Safety of Laser Products)
IEC 60825-1:2007
Safety CSA 60950-1-07 (Canada)
EN 60950-1: 2006 (EU)
IEC 60950-1: 2005 (Second Edition) (International)
UL 60950-1-07 (US)
Table 7-1
Regulatory Approval Declarations (continued)
Issue Approval/Declaration
To Next Page
Loading...
