Ciena 3916 DC Standard - Installing Mounting Brackets for a 23-Inch Frame Installation

Installation 2-19
3916 Service Delivery Switch Hardware Installation and Start-up Manual
009-3226-001 Standard Revision E
Copyright
©
2013-2015 Ciena
®
Corporation July 2015
Procedure 2-5
Installing Mounting Brackets for a 23-inch Frame
Installation
23-inch mounting brackets come in a kit that includes
• 1 left bracket
• 1 right bracket
• 2 cable support brackets
• 4 bracket mounting screws
The 23-inch mounting bracket kits are available as a separately orderable
part:
Standard chassis bracket kits:
• 23-inch standard bracket kit (PN 170-0603-904)
Mini chassis bracket kits:
• 23-inch mini bracket (PN 170-0098-900)
Step Action
1 Orient the right bracket so that the face of the bracket is flush with the front of
the chassis and the upper hole is a “T”.
2 Using a Phillips screwdriver, attach the bracket to the right side of the chassis
using 2 of the provided screws (see Figure 2-4).
Figure 2-4
Bracket mounting holes (23-inch mini bracket: top left; 23-inch standard bracket: bottom right)
Right Bracket
Left Bracket