3-14 Turning Up the System
3916 Service Delivery Switch Hardware Installation and Start-up Manual
009-3226-001 Standard Revision E
Copyright
©
2013-2015 Ciena
®
Corporation July 2015
Procedure 3-6
Accessing the CLI using Telnet
Step Action
1 Use a Telnet client to connect to the
3916.
Telnet <IpAddress>
2 At the login prompt enter a valid user name and password.
Example:
3916 00:02:A1:07:B0:80
SAOS is True Carrier Ethernet TM software.
3916 login: su
Password:
SAOS is True Carrier Ethernet TM software.
Welcome to the shell.
You have logged in to the CLI using Telnet.
To Next Page
Loading...
