Installation 2-31
3916 Service Delivery Switch Hardware Installation and Start-up Manual
009-3226-001 Standard Revision E
Copyright
©
2013-2015 Ciena
®
Corporation July 2015
6 If this is a 3916 Dual AC Standard, repeat step 1 to step 5 to install power to
the second AC power supply.
Note: In order to provide power redundancy to the system, each input power
cable should be connected to an independent power feed. If one power feed
fails, the remaining power supply will compensate to maintain uninterrupted
system operation.
The AC power supply has now been cabled and the system has been
powered on.
To Next Page
Loading...
