2-38 Installation
3916 Service Delivery Switch Hardware Installation and Start-up Manual
009-3226-001 Standard Revision E
Copyright
©
2013-2015 Ciena
®
Corporation July 2015
You have now installed the SFP. You can now either install another SFP,
or install cabling for this port.
Note: The transceivers on the 3916 are hot swappable. A reboot is not
required after the SFPs are installed. The system will discover the SFPs
automatically.
CAUTION
Optic operation should be verified by observing the
status LEDs. Do not look into the laser to verify
operation.
CAUTION
This is a Class 1 laser product. Only optics that have
been qualified by Ciena should be used in this product.
The list of supported optics is included in Packet
Networking Transceivers Reference (009-2011-602).
These optics have been demonstrated to meet Class 1
eye safe levels by a Nationally recognized Authority(s)
such as The Food and Drug administration's
21CFR1040 Laser Energy Source, UL 60950
Information Technology equipment and European
norms EN60825-1 and EN60825-2. Failure to use laser
transceivers which meet these standards could result
in eye damage to users or service personnel working
around the equipment.
To Next Page
Loading...
