INTRODUCTION 2-6 0-5461
NOTE 4
Minimum Generator Recommendation at the Maximum Output Duty Cycle.
Due to large variations in performance and specications of dierent brands and types of generators, CIGWELD cannot
guarantee full welding output power or duty cycle on every brand or type of generator.
Some small generators incorporate low cost circuit breakers on their outputs. These circuit breakers usually will have a
small reset button, and will trip much faster than a switchboard type circuit breaker. This may result in not being able
to achieve full output or duty cycle from the power source / generator combination. For this reason we recommend a
generator that incorporates switchboard type circuit breakers.
CIGWELD recommends that when selecting a generator, that the particular power source / generator combination be
adequately trialled to ensure the combination performs to the users expectations.
NOTE 5
CIGWELD reserves the right to change product performance and specications without notice.
2.11 Optional Accessories
We recommend genuine CIGWELD products.
The biggest range and best quality with guaranteed performance.
Part Number Description
W7003021 TIG Torch 17V, 3m lead with 50mm
2
dinse
BGSAK2 TIG Torch Accessory Kit for 17, 26 & 18 TIG Torches
210254 WeldSkill Regulator/Flowmeter
WS42550 WeldSkill Welding Leadset 4m, 25mm
2
cable, 50mm
2
dinse, 250A Twistlock Electrode Holder
WS53550 WeldSkill Welding Leadset 5m, 35mm
2
cable, 50mm
2
dinse, 400A Twistlock Electrode Holder
Table 2-2
To Next Page
Loading...
