0-5461 4-3 OPERATION
10. Arc Force Feature (Not Shown)
This feature operates in Stick (Manual Arc) mode.
Stick electrodes can sometimes ‘stick’ to the work piece when pushed into a tight corner or joint fit-up with
particular stick electrodes. The Arc force feature can be particularly beneficial in helping to overcome this by
automatically increasing current when the machine senses a decrease in voltage levels. This is a preset feature
and is not adjustable.
11. Anti Stick Feature (Not Shown)
This feature operates in Stick (Manual Arc) mode.
The anti stick feature senses when the electrode sticks and automatically reduces the current to prevent the
Stick Electrode from sticking to the work piece. This is a preset feature and is not adjustable.
To Next Page
Loading...
