CIM ME1500 - Equipment Classification and Standard Reference; Physical Environment and Operating Conditions; Dimensions and Weight; Embossing Capacity

1.2
EQUIPMENT CLASSIFICATION AND STANDARD REFERENCE
Installation Category
II
IP protection
IP 20
Standard reference
IEC EN 61000-6-2
IEC EN 6000-6-3
IEC EN 60950-1
IEC EN 60204-1
1.3
PHYSICAL ENVIRONMENT AND OPERATING CONDITIONS
Operating Temperature
+5° C ÷ 40° C
Operating Humidity
30% ÷ 90%
Operating Altitude
1000m
Transportation and storage
-25° C ÷ 55° C
Temperature
1.4
DIMENSIONS AND WEIGHT
ME 1500
Height
425mm
Width
730mm
Depth
750mm
Weight
85Kg
1.5
EMBOSSING CAPACITY AND TECHNICAL FEATURES
ME1500
PERFORMANCE
1 plate in 28 seconds (45 characters)
INPUT HOPPER CAPACITY
390 plates (0.4mm) variable dimensions
DOT DENSITY
200DPI
OUTPUT HOPPER CAPACITY
Manual + dividers for plates type
PLATE DIMENSIONS
WIDTH: min. 30mm – max 115mm
HEIGHT: min. 21mm – max. 90mm
THICKNESS: 0.4 ÷ 0.8MM
EMBOSSING AREA
Up to 65mm from the top edge of the plate leaving free 4mm from the
bottom.
Measurements are defined according to the base of the character
STANDARD FONTS
Simplex 2: Blocco USA: Blocco 5mm: Embossing or Indenting
SOFTWARE/FIRMWARE
Powertag PC application proprietary software. Automatic date field;
plate archive; DBIII, DBIV, Excel, MS Access file compatibility. Self
diagnostic, automatic repetition of faulty plate personalisation, clearable
and nonclearable counters, setup procedures (via external keyboard).
AVAILABLE OPTIONS
Drum capacity 60 Char.
ME 1500 – Operators Manual
Page 12 of 70