1.7 ENVIRONMENTAL RECOMMENDATIONS
The machine should work in a closed room protected from dust and excessive humidity. The
machine should be positioned in such a way that it’s distance from the walls, doors,
windows, other machines or working positions garantees immediate access in the case of
urgency, maintenance or reparation.
DO NOT INSTALL THIS MACHINE IN THE NEIGHBORHOOD OF OTHER
OPERATING MACHINES WHICH PRODUCE DUST SINCE DUST CAN
DEPOSIT ITSELF INSIDE THE MACHINE AND CAUSE DAMAGE TO THE
INTERNAL ELECTRIC DEVICES. LIQUID SHOULD NOT BE PLACED ON
THE MACHINE COVER SINCE IT HAS NOT BEEN WATER SEALED. IT IS PARTICULARY
IMPORTANT TO AVOID OXIDATION WHICH WOULD ADD TO THE WEAR AND
EROSION OF THE MECHANICAL PARTS.
The machine has been made with fire proof materials thus diminishing the risk of general fire.
Short circuit protection has been implemented so that the power supply is immediately isolated
thus avoiding unwanted current absorption from the external power line.
THE MACHINE GENERATES A WORKING NOISE LEVEL LESSER
THAN 75DB (MEASURED AT A DISTANCE OF ONE METER AND THE
HEIGHT OF 1.60M THE GROUND. WORKING WITH CERTAIN TYPES
OF STEEL PLATES OR WITH THE MACHINE PLACED ON A SUPPORT
TABLE WHICH AMPLIFIES AIRBORNE NOISE OR WITH CARELESS
MECHANICAL SETTING (SEE CHAP. 5.1.3), THIS VALUE MAY BE EXCEEDED. IF
DAILY PERSONAL EXPOSURE OF THE OPERATOR TO NOISE IS LIKELY TO EXCEED
85DB THE OPERATOR MUST WEAR SOME FORM OF EFFICIENT EAR PROTECTION,
IN ACCORDANCE WITH THE 86/188/CEE STANDARDS.
ME 1500 – Operators Manual
To Next Page
