Do not remove or modify in any circumstance the enclosures and the internal protections. In
case of necessity refer to CIM Technical Service.
THE MACHINE IS FURNISHED WITH SPECIAL SAFETY GUARDS
WHICH PROTECT THE OPERATOR FROM COMING INTO CONTACT
WITH THE MECHANICAL AND ELECTRICAL PARTS INSIDE THE
MACHINE. ONLY THOSE PERSONS WHO ARE SPECIALISED IN
REPAIRS AND MAINTENANCE AND WHO HAVE BEEN AUTHORIZED
SHOULD HAVE ACCESS TO THE ABOVE MENTIONED PARTS. SIMPLE
GENERAL MAINTENANCE CAN BE SAFELY PERFORMED BY THE
OPERATOR SO LONG AS THE MACHINE HAS BEEN STOPPED AND
THE ELECTRICAL POWER SUPPLY HAS BEEN DISCONNECTED.
MF GROUP Srl CIM cannot be held responsible for the consequences of not
abiding by these principles when using the machine. In case of breakdown
please call for technical assistance.
ME 1500 – Operators Manual
To Next Page
