CIM ME1500 - Page 34

6.1 SCHEDULED LUBRICATION
This section describes the operations to be carried out at regular intervals to ensure
correct machine functioning.
THE MAINTENANCE OPERATIONS DESCRIBED IN THIS SECTION MUST
BE CARRIED OUT RIGOROUSLY TO ENSURE CORRECT FUNCTIONING
AND LONG LIFE FOR YOUR MACHINE.
IF THE MAINTENANCE OPERATIONS ARE NOT CARRIED OUT IN ACCORDANCE
WITH THE INSTRUCTIONS PROVIDED, CIM IS NOT RESPONSIBLE IN ANY WAY
FOR MACHINE PROBLEMS AND MALFUNCTIONS.
The following table indicates the maintenance program recommended by CIM.
GROUP and/or UNIT
REGULARITY
Load and unload unit
every 100 hours
Carriage unit
every 100 hours
Embossing unit
every 100 hours
Motor embossing unit
every 12.000 hours
IT IS FORBIDDEN REMOVE THE COVER
AND THE PROTECTIONS PRESENT
INSIDE THE EMBOSSER.
6.2 RECOMMENDED LUBRICANTS
A) RECOMMENDED OILS
SEWING MACHINE OIL
70/50 FRICTION REDUCER
3 IN 1 OIL OR EQUIVALENT
B) RECOMMENDED GREASE
HIGH HEAT LITHIUM COMPLEX GREASE
RED OR WHITE
Fig. 6.1
ME 1500 – Operators Manual
Page 34 of 70