To Next Page

To Previous Page

Update

Chapter 3

Setting up a WPAN Connection

3.2.3 CONNECT TO DONGLE

The procedure goes through associating devices for establishing a WPAN connection,

which is pretty much the same except for the software you are using. If your computer is

running Microsoft

Windows

XP Service Pack 3 (SP3) or Windows Vista

Service Pack 1

(SP1), you can use the software support that Windows

includes, or you can use the

driver that the device manufacturer provides. Now, let’s try using the software support

that Windows

XP Service Pack 2 includes.

BT HID Procedure

By default, BT HID is activated on the scanner, and the keyboard type is set to PCAT (US). When

BT HID is re-activated, you will have to select a keyboard type to complete this setting.

The procedure is the same as for BT SPP. Refer to steps 1~11 below.

BT SPP Slave Procedure

1. Turn on the Bluetooth

function on your computer, running Windows XP SP2.

Double-click the Bluetooth

icon from the lower right of the taskbar.

Alternatively, you may go to Control Panel > Bluetooth Devices.

3. Click [Add] to search devices nearby.

CipherLab 1661 User Manual

Other manuals for CipherLab 1661