10
Enter Setup
1660 Barcode Scanner
User Guide
Working Mode
Upon powering up, the scanner will try to establish a connection with 3610 or a computer with
Bluetooth
®
wireless technology. Refer to Chapter 3 – Setting up a WPAN Connection for details.
The connection between the scanners and 3610 is made easy and reliable. Now, it also supports
BT SPP Master Mode as an alternative. Refer to
2.3 BT SPP Master.
Note: If USB Virtual COM or BT SPP is selected for output interface, the host can directly
send serial commands to configure the scanner. For example, run
HyperTerminal.exe and type the 6-digit command located under each setup
barcode. Refer to
Appendix II Host Serial Commands.
To Next Page
Loading...
Need help?
General
