Modified: 3.2.2 Configure Related Settings — Use preset or random
PIN for authentication
Modified: 5.7 Removal of Special Character
Modified: Appendix IV — Use preset or random PIN for
authentication
1.06 Feb. 26, 2009
Modified: 1.1.3 Auto Power Off
Modified: 1.2.2 Memory Mode — 256 KB flash memory
Modified: 1.3 LED Indicator
Modified: 1.6 Scan Modes — add Alternate Mode to table
New: 1.6.8 Alternate Mode — add setup barcode (100203)
Modified: 1.8 Delay between Re-read — add Alternate Mode
Modified: 2.1 BT HID — change setup barcode (100006)
Modified: 3.2.2 Configure Related Settings — add setup barcode
(109973) for Clear PIN Code
Modified: 4.10 GS1-128 (EAN-128)
Modified: 4.16 GS1 DataBar (RSS Family)
Modified: 4.16.2 GS1 DataBar Omnidirectional (RSS-14)
Modified: 4.16.3 GS1 DataBar Expanded (RSS Expanded)
Modified: 4.16.4 GS1 DataBar Limited (RSS Limited)
1.05 Jan. 10, 2009
Modified: 1.2.2 Memory Mode — Send Data behavior
1.04 Dec. 11, 2008
Modified: 1.3.2 Good Read LED Duration — Step 2 should be 150
milliseconds
Modified: 5.6 Multi-Barcode Editor — 4-digit length excludes
prefix,
suffix, length code, etc.
Modified: 6.2.3 Define Data Criteria — Data length includes
prefix,
suffix, length code, etc.
1.03 Nov. 14, 2008
New: Quick Start — Flowchart
New: 1.3.2 Good Read LED Duration
Modified: 2.1.2 Reset Connection — Restore System Defaults will
clear the connection record as well
Modified: 5.6 Multi-Barcode Editor — Reset scan mode to “Laser”
Modified: Host Serial Commands — adds D, E commands
1.02 Sep. 17, 2008
Modified: Product Highlights — Transmit buffer should be 1 KB
Modified: Specifications — updated
1.01 July 23, 2008
Modified: 1.2.1 Transmit Buffer
Modified: Specifications — BT coverage (line-of-sight) up to 10
meters
1.00 May 26, 2008 Initial release
To Next Page
Loading...
Need help?
General
