CipherLab RK25 Reference Manual

90
RK25 Mobile Computer
2.4. NOTIFICATIONS
2.4.1. STATUS LED
Two LED indicators located above the touch screen provide information about charging
status, scanner light beam, and scanner "Good Read" during data collection.
LED 1 for Power Indication
Indicator
Status
Description
Charging
Green, solid
Charging complete (100%)
Red, solid
Charging the mobile computer (0% to 99%)
Red, blinking
Charging temperature error
(lower than 0 or exceed 45 )
Battery Swap
Red, flash once
Pressing power button and select “Battery Swap” in the
pop-up menu, and the red status LED lights up. As the red
light goes off, the device is in complete suspend mode and
Main battery is ready to be replaced
LED 2 for Reader & System Notification
Indicator
Status
Description
Barcode decode
Green, flash once
Good read
Note:
For Scanner decode and Scanner beam LED to function, LED notification must be enabled in Reader
Configuration.

CipherLab RK25 Specifications

General

Brand	CipherLab
Model	RK25
Category	PDA
Language	English