102
Use the volume buttons on the left side of the mobile computer to adjust system and ringer
volume.
A selection of scan engines is available for delivering flexibility to meet different
requirements. Depending on the scan engine integrated, the mobile computer is capable of
scanning barcodes of a number of symbologies that are enabled by default while running
the ReaderConfig application. You won't be able to scan a specific barcode symbology which
is not enabled. Run ReaderConfig.exe to enable/disable barcode symbologies.
An integrated autofocus 13 megapixels rear camera with LED flash in the mobile computer
is specifically designed for collecting image data. You may use the image capture utility to
turn on the camera and capture images. By default, the images taken by this camera
application are saved as JPG files in the
DCIM folder in the device’s primary storage.