CipherLab RS36 Reference Manual

59
Using RS36 Mobile Computer
2.2.
MEMORY
 Flash Memory (ROM)
64GB flash memory for storing the OS (Android 12 and custom application programs).
 Random-access Memory (RAM)
4GB RAM for storing and running programs, as well as storing program data.
 Expansion Slot
The mobile computer is equipped with one SD card slot which can accommodate a
micro SD card, a
microSDHC (up to 32GB) or a microSDXC (up to 64GB-2TB). When
choosing an SD card for best compatibility and performance with RS36, please make
sure of the capacity you need. For the use of SDXC card, please use a new card and
make sure it has not been used in other host devices (computers, cameras, or
readers).
CAUTION OF DATA LOSS
When the main battery is removed or drained, the backup battery on the main board takes
over to supply the mobile computer and keep it in suspension. A fully charged backup
battery will retain the data in the RAM for
10 minutes. When the backup battery is drained
out as well, the mobile computer will shut down, and only the contents of RTC will be
retained (RTC retention will be maintained for at least 72 hours). All other unsaved data will
be lost.
If you want to put away the mobile computer for a couple of days, you should be aware that
data loss occurs when the main battery and backup battery discharges completely.
Therefore, it is necessary to backup data and files before putting away the mobile computer.
2.2.1.
CHECK MEMORY USAGE
The memory manager can offer a glance of how the device is using its RAM. To check the
memory usage, you have to enable “
Developer Option” in advanced.
ENABLE DEVELOPER OPTION
Follow the steps below to enable “Developer Option”:

CipherLab RS36 Specifications

General

Brand	CipherLab
Model	RS36
Category	PDA
Language	English