CipherLab RS36 Reference Manual

185
CipherLab Utilities
6.3.
BARCODE TO SETTING
“BarcodeToSetting” is to read the setting barcodes generated by ADC (Android
Deployment Configurator) to apply the configuration. Launch “
BarcodeToSetting” and the
main screen shows as below:
Item
Description
Total The total amount of the barcodes to be scanned.
Next The item number of the next barcode to be scanned.
Remaining The amount of the remaining barcodes to be scanned.
Result The setting result will be “Success” or “FAIL”
CLEAR DATA Clear the data of the barcode(s) you just scanned.
EXIT Close and leave the application “BarcodeToSetting”.

CipherLab RS36 Specifications

General

Brand	CipherLab
Model	RS36
Category	PDA
Language	English