162
PAIR WITH NFC ENABLED BLUETOOTH DEVICES
1) On the device you would like to pair with, make sure NFC is enabled and Bluetooth
discovery is enabled.
2) Hold the mobile computer without covering the antenna area.
3) Move the mobile computer in proximity with the device for pairing. A screen notification
will appear to indicate that pairing is successful.
Note:
Once the data begins to transfer, just keep the two devices in the distance within 10 m (32.8 ft.);
they no longer have to be held within close range in order to transfer successfully.
NFC Detection Area
To Next Page
Loading...
Need help?
General
