CipherLab RS36 Reference Manual

84
RS36 Mobile Computer
2.4.
NOTIFICATIONS
2.4.1.
STATUS LED
Two LED indicators located above the touch screen provide information about charging
status, scanner light beam, and scanner "
Good Read" during data collection.
LED 1 for Power Indication
Indicator
Status
Description
Charging
Green, solid Charging complete (more than 95%)
Red, solid Charging the mobile computer (0% to 95%)
Red, blinking
Charging temperature error (lower than 0
℃ or exceed 40℃)
LED 2 for Reader & System Notification
Indicator
Status
Description
Barcode decode Green, flash once Good read
System notification White, blinking New notification
Note: For Scanner decode and Scanner beam LED to function, LED notification must be enabled in
the app “ReaderConfig”.
2.4.2.
AUDIO
The speaker is used to play sounds for events in windows and programs, or play audio files.
In addition, it can be programmed for status feedback. In noisy environments, you may
consider connecting a Bluetooth headset instead. The mobile computer also supports USB
Type-C audio adapter for connecting headsets.
Supported audio file formats include: WAV, MP3, AAC, AAC+, Enhanced AAC+, AU
(including ADPCM), Midi, XMF, AMR (NB and WB). Enhanced low delay AAC, FLAC, Vorbis,
PCM.
Use the volume buttons on the side of the mobile computer to adjust the system volume.

CipherLab RS36 Specifications

General

Brand	CipherLab
Model	RS36
Category	PDA
Language	English