CipherLab RS36 Reference Manual

204
RS36 Mobile Computer
3) Tap “Start” to enable the button. You can check “Auto start software trigger after
startup” to have this application automatically launch right after the device starts up.
4) An always-accessible software keys will appear on your screen. This trigger button can
be dragged to the position on the screen where you feel easy to control the trigger.
Tap on “Start” to enable the button.
Check to enable the trigger button
on device boot up.

CipherLab RS36 Specifications

General

Brand	CipherLab
Model	RS36
Category	PDA
Language	English