EasyManuals Logo

CipherLab RS36 Reference Manual

CipherLab RS36
225 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
33
Quick Start
CHARGING TEMPERATURE
The allowed battery charging ambient temperature is between 0 to 40. It is
recommended to charge the battery at room temperature (18 to 25) for optimal
performance.
Please note that battery charging stops when ambient temperature drops below 0 or
exceeds 40.
OPERATION ON BATTERY POWER
When Bluetooth
®
Class I, v4.0, v4.1, V4.2 v2.1 BLE, v2.1 with BLE V2.1+EDR (Enhanced
Data Rate), IEEE 802.11 a/b/g/n/ac/d/h/I/r/k/v/w/mc/ax (802.11ax only on WIFI 6 model)
networking technologies, GSM/UMTS/WCDMA/HSPA/HSPA+/LTE/VOLTE, and GPRS/EGPRS
are all enabled on battery power, the main battery level will drop down substantially.
Prolonged use of the display and continued scanning of barcodes will also affect battery
level.
In order to prevent system from shutting down after the battery is drained out, we suggest
that you keep a fresh battery for replacement at all times, or connect the mobile computer
to an external power.
BATTERY STATUS & STATUS LED DURING CHARGE
When RS36 mobile computer is connected with the external power source, the Status LED
located above the touch screen shows as below:
LED Status
Description
Red, solid Charging the mobile computer
Red, blink Charging error
Green, solid Charging complete
No light The cable is not correctly connected

Table of Contents

Other manuals for CipherLab RS36

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CipherLab RS36 and is the answer not in the manual?

CipherLab RS36 Specifications

General IconGeneral
BrandCipherLab
ModelRS36
CategoryPDA
LanguageEnglish

Related product manuals