Service Manual 13
Raption
1- DC Contactor. 12Vdc. 120A
(KM7.1/KM7.2/KM8.2/KM8.3)
2- Diode rectifier 162A (E6.1)
with forced ventilation (M6.1)
3- Fuse holder 1pole 14x51
(F6.1/ F6.2/F6.3/F6.4)
4- Emergency button (S9.1) 5- Isolation protection device
(B15.1)
6- Heater with fan 400W
(M13.3)
7- Ceramic fuse 5x20 1A
(F3.1/F3.2/F3.3/F3.4)
8- Miniature circuit breaker 4
poles 25A class C (Q4.1/Q4.2/
Q4.3/Q4.4)
9- Conctactor 10A/230VAC
GMR-4M 2a2b (K13.3)
10- Three-phase MID energy
meter (P9.1)
11- AC MCB (Q9.1) 12- Auxiliar contact 6A (Q9.2)
13- RCD protection (T4.1) 14- RCD protection (T9.1) 15- Panel thermostat NC. 10A
250Vac (B13.1)
16- Contactor 4 Poles 80A
230Vac (KM10.1)
17- Mode 4 Control Board
(N14.1)
18- CCS Control board (A15.2)
19- Service schuko (E11.1) 20- 24Vdc Power Supply (J11.1) 21- 12Vdc Power Supply
(J11.2)
22- Expansion board (P5.1) 23- Relays board (J4.1) 24- SuperCapacitors Board
(J07.1)
25- Mode 3 (A9.1) 26- RJ45 Adaptor (X9.3)
27- 12Vdc Relays (K91, K4.1,
K4.2, K8.1, K8.3, K13.2, K13.4,
K15.1)
28- RCBO 1P+N 10A 30mA class
A (Q11.1, Q11.2, Q11.3)
To Next Page
Loading...
