Raption
26 Service Manual
3
A
PC Screen (HMI)
1 32
4
6 7
8
9
10
11
1- MAC Address sticker 2- RFID card reader (B11.1) 3- PC Screen cover
4- Cover's nut x 4 5- RJ45 port 6- USB port
7- PC Screen power supply 8- RS485_1 communication 9- RS485_2 communication
10- Power supply supervision 11- Courtesy lights connector
The PC screen (HMI) and the RFID reader are located at the right door. Normally, at the
RJ45 port it is connected the Ethernet cable coming from the router when it is installed.
However, it is also here where the Service PC should be connected when Charing Station
has to be configured.
Internal application and firmware of the Charging Station are located in the Screen.
This device, among other functions, is controlling the communications of the internal
components.
5
To Next Page
Loading...
Need help?
General
