Raption
30 Service Manual
8 J16 Enable/disable power modules output
9 J18 Outputs doe Bender test, lock CCS, precharge, heater.
10 J17 Outputs for diode fan, modules.
11 J7 RS485-1-M communications with isolation detector device
12 J8 RS485-2-S Communications with the screen
13 J5 CAN 1 communications with CHAdeMO cable
14 J6 CAN 2 communications with Expansion board
15 J22 Input thermostats from CCS cable
16 J20 Relay output CHA cable and CCS contactor
17 J19 Relay output CHA contactor and CHA lock
18 J2 CCS LEDs
19 J3 CHA LEDs
To Next Page
Loading...
