Raption
6 Service Manual
This manual provides service and maintenance information for CIRCUTOR Charge Point, which
has been designed and tested to allow electric vehicle charging, specified in IEC 61851.
This document has different sections describing electrical components inside the Charge
Point and a step-by-step installation procedure.
It is mandatory to follow the basic security information supplied in this manual to ensure safe
and proper installation.
Failure to follow safety instructions may involve personal injury, equipment damage and
danger of death. CIRCUTOR is not responsible for events arising from such breach.
ELECTRIC RISK
- This symbol indicates a potentially hazardous situation which, if not avoided
may result in a risk of fire, serious injury or death.
- The Charge Point must be disconnected from any power source before
performing any maintenance, repair or electrical manipulation inside.
ATTENTION!
- Follow the instructions preceded by this symbol, if not respect them or perform
them correctly, may result in minor or moderate injury to the user, damage to
equipment, damage to facilities or other property.
- Handling the equipment can cause injuries as result of the dimension and
weight. Persons handling the unit must wear safety shoes and gloves.
1
THE FOLLOWING SYMBOLS ARE USED FOR IMPORTANT
SAFETY INFORMATION IN THIS DOCUMENT
To Next Page
Loading...
Need help?
General
