Cisco 10000-2P2-2DC - Page 10

Contents
x
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Feature History for TCP MSS Adjust 6-12
Information about TCP MSS Adjust 6-12
Restrictions for TCP MSS Adjust 6-13
Configuration Task for TCP MSS Adjust 6-13
TCP MSS Adjustment Configuration: Examples 6-14
VLAN Range 6-15
Feature History for VLAN Range 6-15
Restrictions for VLAN Range 6-16
Configuration Task for VLAN Range 6-16
Configuring a Range of VLAN Subinterfaces 6-16
Configuration Examples for VLAN Range 6-17
Verifying the Configuration of a Range of Subinterfaces 6-18
CHAPTER 7 Configuring IP Unnumbered on IEEE 802.1Q VLANs 7-1
Feature History for IP Unnumbered on VLANs 7-2
Benefits for IP Unnumbered on VLANs 7-2
Restrictions for IP Unnumbered on VLANs 7-3
Configuration Tasks for IP Unnumbered on VLANs 7-3
Configuring IP Unnumbered for an Ethernet VLAN Subinterface 7-3
Configuring IP Unnumbered for a Range of Ethernet VLAN Subinterfaces 7-4
Configuration Examples for IP Unnumbered on VLANs 7-4
Monitoring and Maintaining IP Unnumbered Ethernet VLAN Subinterfaces 7-5
CHAPTER 8 Configuring ATM Permanent Virtual Circuit Autoprovisioning 8-1
ATM PVC Autoprovisioning 8-1
Local Template-Based ATM PVC Provisioning 8-2
Feature History for Local Template-Based ATM PVC Provisioning 8-2
ATM Interface Oversubscription 8-2
VC Class 8-3
ATM VC Scaling and VC Assignment 8-4
When SAR the Page Limit is Reached 8-5
OC-12 ATM Line Card and VC Scaling 8-5
Feature History for ATM PVC Autoprovisioning 8-5
Restrictions for ATM PVC Autoprovisioning 8-5
Configuration Tasks for ATM PVC Autoprovisioning 8-6
Creating an On-Demand PVC Using a VC Class 8-6
Creating an On-Demand PVC Directly 8-8
Creating an On-Demand PVC With Infinite Range 8-11
Monitoring and Maintaining ATM PVC Autoprovisioning 8-12