Cisco 10000-2P2-2DC - Monitoring and Maintaining an On-Demand Address Pool; Configuring Odaps to Obtain Subnets through IPCP Negotiation

10-15
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 10 Configuring Address Pools
On-Demand Address Pool Manager
Example 10-7 Defining DHCP ODAPs on an Interface
!
interface Virtual-Template1
ip vrf forwarding green
ip unnumbered loopback1
ppp authentication chap
peer default ip address dhcp-pool
Configuring ODAPs to Obtain Subnets Through IPCP Negotiation
Example 10-8 creates a DHCP address pool named my_pool, configures the pool as an on-demand
address pool using IPCP as the subnet allocation protocol, and configures the Ethernet0 interface to
automatically obtain its IP address from the my_pool address pool.
Example 10-8 Enabling ODAPs to Obtain Subnets Through IPCP Negotiation
!
ip dhcp pool my_pool
import all
origin ipcp
!
interface Ethernet0
ip address pool my_pool
ip verify unicast reverse-path
shutdown
hold-queue 32 in
!
Monitoring and Maintaining an On-Demand Address Pool
To monitor and maintain an ODAP, enter the following commands in privileged EXEC mode:
Command Purpose
Router# clear ip dhcp [pool name] binding {* |
address}
Deletes an automatic address binding or objects for a specific
pool from the DHCP server database.
Router# clear ip dhcp [pool name] conflict {* |
address}
Clears an address conflict(s) for a specific pool from the DHCP
server database.
Router# clear ip dhcp [pool name] subnet {* |
address}
Clears all currently leased subnets in the specified DHCP pool or
in all DHCP pools if you do not specify a specific pool.
Router# debug dhcp details
Monitors subnet allocation and subnet releases for the on-demand
address pools.
Router# debug ip dhcp server events
Reports DHCP server events, such as assignments and database
updates.
Router# show ip dhcp import
Displays the option parameters imported into the DHCP server
database.