Contents
xiii
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Configuration Tasks for Local AAA Server, User Database—Domain to VRF Using Local
Attributes 11-6
Defining AAA 11-6
Defining RADIUS and Enabling NAS-PORT 11-7
Defining a VRF 11-7
Applying AAA to a Virtual Template 11-7
Defining a Loopback Interface 11-8
Creating an IP Address Pool 11-8
Defining a Subscriber Profile 11-8
Defining an AAA Attribute List 11-8
Verifying Local AAA Server, User Database—Domain to VRF Using Local Attributes 11-9
Configuration Example for Local AAA Server, User Database—Domain to VRF 11-9
Example—VRF with DBS 11-11
Example—VRF with ACL 11-12
Monitoring and Maintaining Local AAA Server, User Database—Domain to VRF 11-12
CHAPTER
12 Configuring Traffic Filtering 12-1
IP Receive ACLs 12-1
Feature History for IP Receive ACLs 12-2
Restrictions for IP Receive ACLs 12-2
Configuration Tasks for IP Receive ACLs 12-2
Configuring Receive ACLs 12-3
Verifying Receive ACLs 12-3
Configuration Example for IP Receive ACLs 12-3
Time-Based ACLs 12-4
Feature History for Time-Based ACLs 12-4
Restrictions for Time-Based ACLs 12-5
Configuration Tasks for Time-Based ACLs 12-5
Creating a Time Range 12-5
Applying a Time Range to a Numbered Access Control List 12-6
Applying a Time Range to a Named Access Control List 12-7
Monitoring and Maintaining Time-Based ACLs 12-8
Configuration Examples for Time-Based ACLs 12-8
CHAPTER
13 Unicast Reverse Path Forwarding 13-11
Feature History for uRPF 13-12
Prerequisites for uRPF 13-12
Restrictions for uRPF 13-12
Configuring Unicast RPF 13-13
To Next Page
Loading...
