Cisco 10000-2P2-2DC - Page 382

18-78
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 18 SSO-BFD
Configuration Examples of SSO-BFD
ip address 50.0.0.1 255.0.0.0
negotiation auto
mpls ip
mpls label protocol ldp
!
!
router ospf 50
router-id 1.1.1.1
log-adjacency-changes
nsf ietf
network 1.1.1.1 0.0.0.0 area 0
network 50.0.0.0 0.255.255.255 area 0
!
router bgp 75
bgp router-id 1.1.1.1
bgp log-neighbor-changes
bgp graceful-restart restart-time 120
bgp graceful-restart stalepath-time 360
bgp graceful-restart
neighbor 2.2.2.2 remote-as 75
neighbor 2.2.2.2 update-source Loopback0
!
address-family ipv4
no synchronization
redistribute connected
neighbor 2.2.2.2 activate
no auto-summary
exit-address-family
!
address-family vpnv4
neighbor 2.2.2.2 activate
neighbor 2.2.2.2 send-community both
exit-address-family
!
address-family ipv4 vrf vpn1001
no synchronization
redistribute connected
neighbor 20.1.1.1 remote-as 71
neighbor 20.1.1.1 ha-mode sso
neighbor 20.1.1.1 fall-over bfd
neighbor 20.1.1.1 activate
exit-address-family
!
address-family ipv4 vrf vpn1002
no synchronization
redistribute connected
neighbor 20.1.2.1 remote-as 71
neighbor 20.1.2.1 ha-mode sso
neighbor 20.1.2.1 fall-over bfd
neighbor 20.1.2.1 activate
exit-address-family
!
address-family ipv4 vrf vpn1003
no synchronization
redistribute connected
neighbor 20.1.3.1 remote-as 71
neighbor 20.1.3.1 ha-mode sso
neighbor 20.1.3.1 fall-over bfd
neighbor 20.1.3.1 activate
exit-address-family
!
address-family ipv4 vrf vpn1004
no synchronization
redistribute connected