20-35
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 20 Configuring L2 Virtual Private Networks
Configuration Tasks for L2VPN
The values shown in the tables are as follows:
• No—You cannot perform this policy map action
• Yes—You can perform this policy map action
• N/A (not applicable)—You can apply the policy map action but it does not have any effect on packets
Ta b l e 20-4 Frame Relay DLCI Input Policy Map Actions
Policy Map Actions Frame Relay DLCI Interface
bandwidth no
queue-limit no
priority no
shape no
random-detect no
set ip prec/dscp N/A
set qos-group yes
set discard class yes
set atm-clp N/A
set fr-de no
set cos no
police yes
set mpls-exp topmost N/A
set mpls-exp imposition N/A
Ta b l e 20-5 Frame Relay Output (Disposition Router) Policy Map Actions
Policy Map Actions Frame Relay DLCI Interface
bandwidth yes
queue-limit yes
priority yes
shape yes
random-detect yes (discard class only)
set ip prec/dscp N/A
set qos-group N/A
set discard class yes
set atm-clp no
set fr-de not supported
set cos no
police yes
set mpls-exp topmost N/A
To Next Page
Loading...
