Cisco 10000-2P2-2DC - Page 444

20-46
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 20 Configuring L2 Virtual Private Networks
Configuration Example—Frame Relay over MPLS
frame-relay lmi-type q933a
interface Serial8/0/0.1/1:0.1 point-to-point
interface Serial8/0/0.1/1:0.2 point-to-point
!Two AToM VC configuration with vc ids 1 & 2
connect atom1 Serial8/0/0.1/1:0 17 l2transport
xconnect 1.1.1.1 1 pw-class pw_atom1
!
!
connect atom2 Serial8/0/0.1/1:0 18 l2transport
xconnect 1.1.1.1 2 pw-class pw_atom1
CE2 Configuration
================================
interface Serial8/0/0.1/1:0
no ip address
encapsulation frame-relay
no fair-queue
frame-relay lmi-type q933a
frame-relay intf-type dce
!
interface Serial8/0/0.1/1:0.1 point-to-point
ip address 192.1.1.2 255.255.255.0
frame-relay interface-dlci 17
!
interface Serial8/0/0.1/1:0.2 point-to-point
ip address 192.1.2.2 255.255.255.0
frame-relay interface-dlci 18
Verifying PE1 Configuration
The PE1 router shows two AToM VCs are up.
================================
router# show mpls l2tran vc
Local intf Local circuit Dest address VC ID Status
------------- -------------------------- --------------- ---------- ----------
Se8/0/0.1/1:0 FR DLCI 17 2.2.2.2 1 UP
Se8/0/0.1/1:0 FR DLCI 18 2.2.2.2 2 UP
router# show mpls l2tran vc 1 det
Local interface: Se8/0/0.1/1:0 up, line protocol up, FR DLCI 17 up
Destination address: 2.2.2.2, VC ID: 1, VC status: up
Output interface: PO4/0/0, imposed label stack {93 19}
Preferred path: not configured
Default path: active
Next hop: point2point
Create time: 00:00:49, last status change time: 00:00:06
Signaling protocol: LDP, peer 2.2.2.2:0 up
MPLS VC labels: local 19, remote 93
Group ID: local 0, remote 0
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
VC statistics:
packet totals: receive 0, send 0
byte totals: receive 0, send 0
packet drops: receive 0, seq error 0, send 0
router# sh mpls l2tran vc 2 det
Local interface: Se8/0/0.1/1:0 up, line protocol up, FR DLCI 18 up
Destination address: 2.2.2.2, VC ID: 2, VC status: up
Output interface: PO4/0/0, imposed label stack {98 19}
Preferred path: not configured