23-6
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 23 Configuring Gigabit EtherChannel Features
Configuring QoS Service Policies on GEC Interfaces
• Shape egress traffic for subinterfaces port-channel 1.1 and port-channel 1.3 together at 150 mbps
Step 3 Create match-vlan class-maps as follows:
Class-map match-any vlan_2
Match vlan 2
Class-map match-any vlan_3
Match vlan 3
Class-map match-any vlan_4
Match vlan 4
Class-map match-any vlan_2_4
Match vlan 2 4
Step 4 Create policy-maps as follows:
Policy-map mega_ingress
Class vlan_2
Police 100 mbps
Class vlan_3
Police 150 mbps
Policy-map mega_egress
Class vlan_3
Shape 50 mpbs
Class vlan_2_4
Shape 150 mbps
Step 5 Apply this policy on the GEC member links.
Interface Gig3/0/0
Service-policy input mega_ingress
Service-policy output mega_egress
Interface Gig4/0/0
Service-policy input mega_ingress
Service-policy output mega_egress
Configuration Example for Applying QoS on GEC Bundle Subinterfaces
Example 23-1 shows how QoS is applied on GEC bundle subinterfaces:
Example 23-1 Applying QoS on GEC Bundle Subinterfaces
Class-map match-any dscp_20_30
Match dscp 20 30
Class-map match-any dscp_40
Match dscp 40
Policy-map police_dscp
Class dscp_20_30
Police 50 3000 3000 conform-action transmit exceed-action drop
Set ip dscp af22
Class dscp_40
Police 10 3000 3000 conform-action transmit exceed-action drop
Policy-map customer_A
Class class-default
Police 100 mpbs
service-policy police_dscp
Policy-map customer_B
Class class-default
Police 150 mbps
To Next Page
Loading...
