Cisco 10000-2P2-2DC - Page 6

Contents
vi
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Configuring PPPoE over Ethernet Virtual Connections and Applying Virtual Templates 3-20
Configuring RBE over ATM Virtual Connections 3-22
Configuring and Associating Virtual Private Networks 3-28
Configuring Virtual Private Networks 3-28
Associating VPNs with a Virtual Template Interface 3-28
Configuring RADIUS User Profiles for RADIUS-Based AAA 3-30
Verifying VPN Operation 3-30
Configuration Examples for RA to MPLS VPN 3-30
PPPoA to MPLS VPN Configuration Example 3-31
PPPoE to MPLS VPN Configuration Example 3-34
RBE to MPLS VPN Configuration Example 3-38
Monitoring and Maintaining an MPLS Configuration 3-39
Verifying the Routing Protocol Is Running 3-40
Verifying MPLS 3-40
Verifying Connections Between Neighbors 3-40
Verifying Label Distribution 3-41
Verifying Label Bindings 3-42
Verifying Labels Are Set 3-43
Monitoring and Maintaining the MPLS VPN 3-43
Verifying VRF Configurations 3-44
Verifying the Routing Table 3-44
Verifying the PE to PE Routing Protocols 3-45
Verifying the PE to CE Routing Protocol 3-46
Verifying the MPLS VPN Labels 3-46
Testing the VRF 3-46
Monitoring and Maintaining PPPoX to MPLS VPN 3-47
Monitoring and Maintaining RBE to MPLS VPN 3-48
CHAPTER 4 Configuring Multiprotocol Label Switching 4-1
BGP Multipath Load Sharing for eBGP and iBGP in an MPLS VPN 4-1
Feature History for BGP Multipath Load Sharing for eBGP and iBGP in an MPLS VPN 4-2
Restrictions for BGP Multipath Load Sharing for eBGP and iBGP in an MPLS VPN 4-3
Prerequisites for BGP Multipath Load Sharing for eBGP and iBGP in an MPLS VPN 4-3
IGP Convergence Acceleration 4-3
Configuring IGP Convergence Acceleration 4-4
Configuring BGP Multipath Load Sharing for eBGP and iBGP in an MPLS VPN 4-4
Configuring Multipath Load Sharing for eBGP and iBGP 4-5
Verifying Multipath Load Sharing for eBGP and iBGP 4-5
Configuration Examples for BGP Multipath Load Sharing for eBGP and iBGP in an MPLS VPN 4-5