Cisco 10000-2P2-2DC - Page 601

Index
IN-5
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
bba-group 3-21, 6-4, 6-9
call admission limit 2-4
class-range 8-8
class-vc 8-7
clear
ip dhcp 10-15
ip dhcp pool name subnet 10-16
clear pppoe 6-12
clear vpdn tunnel 9-10
create on-demand 8-6, 8-9, 8-11
debug
aaa accounting 5-35, 5-38, 5-52, 16-42
aaa authentication 5-38
aaa authorization 5-35, 5-52
dhcp 10-15
ip dhcp server 10-15
mpls packet 3-41
ppp chap 5-52
ppp negotiation 5-35, 5-52
ppp negotiation chap 5-52
radius 5-35, 5-52
vpdn 9-10
vpdn error 5-35
vpdn errors 5-52
vpdn event 5-35
vpdn events 5-52
domain domain-name 5-4
encapsulation dot1q 6-8
group session-limit 4-17, 4-18
idle-timeout 8-2
import 10-11
initiate-to 5-5, 9-5
interface multilink 22-9
interface range 6-16
interface-specific 2-11
interface virtual-template 5-29
ip address pool 10-11
ip address-pool 10-7
ip dhcp pool 10-7, 10-11
ip dhcp relay information option 3-11, 3-25
ip helper-address 3-27
ip local pool 10-17
ip multicast-routing 15-35
ip pim dense-mode 15-35
ip pim sparse-dense-mode 15-36
ip pim sparse-mode 15-36
ip radius source-interface 5-34
ip tos reflect 9-6
ip unnumbered loopback 5-29
ip vrf 4-24, 5-36
ip vrf forwarding 5-32, 5-34, 27-2
keepalive 2-17
l2tp ip tos reflect 9-1
local name 9-4, 9-5
logging rate-limit 2-4
multihop hostname 9-5
no
bba-group pppoe 6-3
no atm pxf queuing 2-15
no bba-group pppoe 6-4, 6-9
no ip gratuitous-arp 2-11
no origin 10-11
no source vpdn-template 4-16
no virtual-template snmp 2-13
oam-ac emulation-enable 20-15
oam-pvc manage 20-15
origin 10-7, 10-11
peer default ip address 10-10
ping 3-41, 3-47, 10-16
policy-map 2-6
pool-member 9-7
ppp authentication 5-29, 5-34
ppp authorization 5-34
ppp multilink 22-10
ppp multilink fragment disable 22-12
ppp multilink interleave 22-11, 22-12, 22-29
pppoe
enable 6-3, 6-8