Cisco 10000-2P2-2DC - Page 603

Index
IN-7
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
ubr 2-15
username 9-4
utilization mark
high 10-7
low 10-7
vbr-nrt 2-15
vc-class atm 5-10, 8-6, 8-11
virtual-template 3-21, 5-30, 6-3, 6-4, 6-9
vpdn authorize domain 5-4
vpdn enable 4-18, 5-29, 6-3, 6-8, 9-3
vpdn group 5-8
vpdn-group 5-7, 5-12, 5-25, 5-29, 5-36, 9-4
vpdn ip udp ignore checksum 2-19
vpdn multihop 9-3
vpdn search-order 9-5
vpdn session-limit 4-18
vpdn-template 4-18
vpdn tunnel authorization network 5-42
vpn 27-2, 27-4
vpn id 3-8
vpn service 5-9
vpn service domain-name 5-5
xconnect 20-13
committed access rate 1-2
committed information rate
definition 1-2
configuration examples
tunnel VRF 27-4
VRF-aware VPDN tunnels 27-4
configurations
per host 5-24
per server group 5-24
configuring
VC oversubscription 8-14
Configuring L2 Virtual Private Networks 20-1
connectivity
testing 3-47
constant bit rate
definition 1-2
CoS
definition 1-3
CPE 1-3
CPU HOG messages 2-13
create on-demand
PVCs and PPP sessions
RP CPU usage 2-4
create on-demand command 8-6, 8-9, 8-11
with infinite range 8-6
customer edge router
See CE router
customer premises equipment
See CPE
D
DBS 1-3
debug
aaa accounting 5-35, 5-38, 5-52, 16-42
aaa authentication 5-38
aaa authorization 5-35, 5-52
atm
autovc command 8-12
dhcp command 10-15
ip dhcp command 3-49, 10-15
ip dhcp server events command 3-49
ip dhcp server packet command 3-49
ip packet command 3-49
mpls packet 3-41
ppp chap 5-52
ppp negotiation 5-35, 5-52
ppp negotiation chap 5-52
radius 5-35, 5-52
vpdn command 9-10
vpdn error 5-35
vpdn errors 5-52
vpdn event 5-35
vpdn events 5-52
default method list 5-27