FINAL DRAFT - CISCO CONFIDENTIAL
6-3
Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter 6 ASH Commands
Summary of Security Permissions for ASH Commands
manufacturer restore
defaults passwords
Restores manufacturer password defaults.
See manufacturer restore defaults passwords
Command, page 6-32.
No No Yes
network host ftp FTPs to remote host.
See FTP Command Line, page 7-1
No Yes Yes
network host ping Pings remote host. No Yes Yes
network host telnet Telnets to remote host No Yes Yes
pdm busmode display Displays the bus mode (simplex or duplex).
See pdm busmode display Command, page 6-8
Yes Yes Yes
pdm busmode modify Modifies the bus mode (simplex or duplex).
See pdm busmode modify Command, page 6-9
No Yes Yes
pdm cfg threshold bus
display
Displays bus threshold configuration. Yes Yes Yes
pdm cfg threshold bus
modify
Modifies bus threshold configuration. No Yes Yes
pdm cfg threshold display Display threshold configuration. Yes Yes Yes
processor reset Resets the CPU.
See processor reset Command, page 6-12.
No Yes Yes
restore system Restores configuration from backup file.
See restore system Command, page 6-31.
No No Yes
shell lines set Sets the number of shell lines.
See shell lines set Command, page 6-13.
Yes Yes Yes
shell more disable Disables more.
See shell more enable and disable Commands,
page 6-13.
Yes Yes Yes
shell more enable Enables more.
See shell more enable and disable Commands,
page 6-13.
Yes Yes Yes
shell rows set Sets the number of shell rows. Yes Yes Yes
shell status display Displays the shell status.
See shell status display Command, page 6-13.
Yes Yes Yes
shell type display Displays the default shell type. Yes Yes Yes
shell type modify Modifies the default shell type.
See shell type modify Command, page 6-13.
No No Yes
snmp attribute get Gets an attribute.
See snmp attribute get Command, page 6-15.
No Yes Yes
snmp attribute list Lists an attribute.
See snmp attribute list Command, page 6-16.
No Yes Yes
snmp attribute oid get get an attribute No Yes Yes
snmp attribute oid set set an attribute No Yes Yes
Table 6-1 ASH Commands Security Permissions (Access Levels) (continued)
Command Description
User Access Levels
RRWRWA