FINAL DRAFT - CISCO CONFIDENTIAL
9-54
Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter 9 TL1 Commands
TL1 Commands and Autonomous Messages
9.7.38 RTRV-RFILE
Command RTRV-RFILE
Lists a specific file or all files on the flash file system of the ONS 15216 EDFA2.
Syntax
RTRV-RFILE:[<tid>]::<ctag>::[<localfilename>+];
<sid> <date> <time>
M <ctag> COMPLD
"<aid>:<localfilename>"
;
Example 9-40 RTRV-RFILE Command and Response (List all Files)
Amp01:ONS15216 EDFA2> RTRV-RFILE:Amp01::123;
Amp01 2002-01-12 08:01:05
M 123 COMPLD
"EQPT:snmp.cfg,15216EdfaSw_2.3.0,passwd"
;
Example 9-41 RTRV-RFILE Command and Response (List a Specific File)
Amp01:ONS15216 EDFA2> RTRV-RFILE:Amp01::123::snmp.cfg;
Amp01 2002-01-12 08:01:05
M 123 COMPLD
"EQPT:snmp.cfg"
;
Table 9-45 RTRV-RFILE Syntax Description
Parameter Syntax Description
aid Always EQPT.
EQPT General parameters of the ONS 15216 EDFA2 (not directly
affecting optical signal or power bus).
localfilename string Name of the file on the flash file system of the
ONS 15216 EDFA2 that is to be listed. A null value in the
request means all files are to be listed. A null value in the
response means the file specified does not exist. File names are
case sensitive.
To Next Page
Loading...
Need help?
General
