Cisco 15216 EDFA2 User Manual

FINAL DRAFT - CISCO CONFIDENTIAL
5-36
Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter 5 SNMP MIB Installation and Configuration
Retrieving Information
Step 1 Restore from the backup database from a file (in this case, dbbkup) on the FFS:
a. Set cerent15216EdfaOpDbFileName = "dbbkup".
b. Set cerent15216EdfaOpRequestId = 1.
c. Set cerent15216EdfaOpDbRestore = 2.
d. Wait until cerent15216EdfaOpStatus goes from inprogress to idle.
e. Verify that cerent15216EdfaOpResult is 0.
Step 2 Save the changes by setting cerentEdfa15216OpSaveConfig = 2.
Step 3 Reboot the ONS 15216 EDFA2 by setting cerentEdfa15216OpReset = 2.
After the processor reboots, user names and passwords from the new user database must be used for
access.
5.6.9 Alarm Entry
Command snmp table display local cerent15216EdfaAlarmEntry
Syntax Description snmp table display local cerent15216EdfaAlarmEntry
Accesses the alarm status. Example 5-16 shows the cerent15216EdfaAlarmEntry display command.
Example 5-16 cerent15216EdfaAlarmEntry Display Command
ash:hostname:ONS15216 EDFA2> snmp table display local cerent15216EdfaAlarmEntry
CLASS CERENT-15216-EDFA-MIB.cerent15216EdfaAlarmEntry ::=
{
anQuasarAlarmIndex = 1;
anQuasarAlarmID = lcrnt1;
anQuasarAlarmPriority = minor;
anQuasarAlarmState = cleared;
anQuasarAlarmEnable = enabled;
anQuasarAlarmDateAndTime = "2002-10-16,13:49:42.8 -8:60";
};
CLASS CERENT-15216-EDFA-MIB.cerent15216EdfaAlarmEntry ::=
{
anQuasarAlarmIndex = 2;
anQuasarAlarmID = lcrnt2;
anQuasarAlarmPriority = minor;
anQuasarAlarmState = cleared;
anQuasarAlarmEnable = enabled;
anQuasarAlarmDateAndTime = "2002-10-16,13:31:55.4 -8:60";
};
CLASS CERENT-15216-EDFA-MIB.cerent15216EdfaAlarmEntry ::=
{
anQuasarAlarmIndex = 3;
anQuasarAlarmID = ltmp1;
...

Cisco 15216 EDFA2 Specifications

General

Brand	Cisco
Model	15216 EDFA2
Category	Network Router
Language	English