EasyManuals Logo
Home>Cisco>Network Router>15216 EDFA2

Cisco 15216 EDFA2 User Manual

Cisco 15216 EDFA2
280 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #201 background imageLoading...
Page #201 background image
FINAL DRAFT - CISCO CONFIDENTIAL
9-53
Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter 9 TL1 Commands
TL1 Commands and Autonomous Messages
Example 9-39 RTRV-NE-GEN Command and Response
Amp01:ONS15216 EDFA2> RTRV-NE-GEN:Amp01::123;
Amp01 2002-01-12 08:01:05
M 123 COMPLD
"EQPT:NAME=Amp01,IPADDR=172.22.87.100,IPMASK=255.255.255.0,DEFRTR=172.22
.87.2,BOOTRECORDTYPE1=FLASH,BOOTFILENAME1=15216EdfaSw_2.3.0,BOOTIPADDR1=0.0.0.0,
BOOTRECORDTYPE2=TFTP,BOOTFILENAME2=bin/15216EdfaSw_2.0.1,BOOTIPADDR2=1
72.22.128.249,CLI=TL1"
;
Table 9-44 RTRV-NE-GEN Syntax Description
Parameter Syntax Description
aid Always EQPT.
EQPT General parameters of the ONS 15216 EDFA2 (not directly
affecting optical signal or power bus).
name string System’s sid/tid name (sysName).
ipaddr string IP address of the system
(cerent15216EdfaSromIpMgmtEnetAddress).
ipmask string Subnet mask of the system
(cerent15216EdfaSromIpMgmtEnetSubNetMask).
defrtr string IP address of the default router
(cerent15216EdfaSromIpMgmtDefaultRouterAddress).
bootrectype1 Boot record type (cerent15216EdfaBootType for first entry).
Possible values are:
FLASH Boot from flash.
TFTP Boot through TFTP.
bootfilename1 string Boot file name (cerent15216EdfaBootFileName for first entry).
File names are case sensitive.
bootipaddr1 string IP address to boot from if bootrectype1 is set to TFTP
(cerent15216EdfaBootIpAddress for first entry).
bootrectype2 Boot record type (cerent15216EdfaBootType for second entry).
Possible values are:
FLASH Boot from flash.
TFTP Boot through TFTP.
bootfilename2 string Boot file name (cerent15216EdfaBootFileName for second
entry). File names are case sensitive.
bootipaddr2 string IP address to boot from if bootrectype2 is set to TFTP
(cerent15216EdfaBootIpAddress for second entry).
cli Default type of command line interface for all EIA/TIA-232
and default telnet port user sessions with the
ONS 15216 EDFA2. Possible values are:
TL1 TL1shell interface (manufacturer default).
ASH ASH shell interface – ONS 15216 EDFA2’s native interface.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 15216 EDFA2 and is the answer not in the manual?

Cisco 15216 EDFA2 Specifications

General IconGeneral
BrandCisco
Model15216 EDFA2
CategoryNetwork Router
LanguageEnglish

Related product manuals