Cisco 15216 EDFA2

FINAL DRAFT - CISCO CONFIDENTIAL
9-55
Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter 9 TL1 Commands
TL1 Commands and Autonomous Messages
9.7.39 RTRV-TH-DWDM
Command RTRV-TH-DWDM
Retrieves optical threshold and set point values for the ONS 15216 EDFA2.
Syntax
RTRV-TH-DWDM:[<tid>]:<aid>:<ctag>::[<thresholdtype>][,][,];
<sid> <date> <time>
M <ctag> COMPLD
"<aid>,DWDM:<thresholdtype>,,,<thresholdvalue>"
;
Example 9-42 RTRV-TH-DWDM Command and Response
Amp01:ONS15216 EDFA2> RTRV-TH-DWDM:Amp01:ALL:123::LPOUTDEV;
Amp01 2001-06-08 09:00:05
M 123 COMPLD
"1,DWDM:LPOUTDEV,,,1000"
;
Table 9-46 RTRV-TH-DWDM Syntax Description
Parameter Syntax Description
date yyyy-mm-dd Date of origination of TL1 message.
time hh:mm:ss Time of origination of TL1 message.
aid 1 and ALL have same input effect.
1 Directly affecting the optical signal.
ALL Any or all of the preceding (command input only).